Here you will find Top Post (Straight, Elbows, Flag), Side Post/Stud Top, including Extra Wire Battery Terminals and Adapters
Table of Contents
These are used for dual battery setups where two or more batteries will be connected in parallel on a single cable.
Sold with a zinc plated standard bolt. A tin-plated corrosion-resistant (aka anti-corrosion bolt) is optional.
Use with stud batteries, to connect multiple batteries. 3/8 hole.
Below are some of the common special-purpose parts we’ve been asked to provide.
Solder pellets are pre-measured solder and flux combinations. Strip wire, add correct solder pellet to lug, insert the wire in the lug, apply heat until the solder melts, and slide the cable into the lug.