Battery Cable Lugs

Parts. Just Parts...

Some guys just want to buy parts and assemble cables themselves. Using the links below you can purchase wire, battery terminals and lugs. I don't have all the various wire, terminals and lugs that we have in stock on the page yet, but the most common are listed. I did not list any #8 or #6 wire or ends. Email me if you want those sizes. If you don't see what you want please email me. I may have it in stock and just not yet listed it.

The manufacturer of the ends recommends crimping as the best way to attach ends. If done right, with good equipment, the crimp is so tight that there is no air gaps and no room for the solder. I offer a few styles of crimpers. I don't really recommend the cheap hammer style crimpers, but they'll do the job if you're not too picky. They also seem to "wear out" and start binding after several uses.

Soldering is tough on the insulation and the solder wicks up the wire destroying the flexibility.   Soldering also requires flux, hazardous lead solder and solvents (for cleaning the flux). I've also heard soldering can crack between end and wire.   However, I've soldered ends in the past and I've never experienced any problems. I also have some excellent solder for sale if you need it. email for details.

Items are spec'ed by wire gauge. (see Technical data for what the sizes mean). Battery terminals are also specs as positive or negative (positive is slightly larger). Lugs are also spec'ed by bolt hole size.

Because of the large number of parts, I've split this page into several categories...   Click on the part category to expand the list.

Wire: coming soon.
#4, 2, 1/0, 2/0 3/0 and 4/0, Red or Black, SGT or Marine battery cable.

Battery Terminals:
Top post (Straight, Elbows and Flag), Side Post/Stud Top, including Extra Wire Battery Terminals and Adapters.

Lugs:
Standard Ring Terminals, Splices and Heavy Duty Lugs and including 45 and 90 degree Lugs.

Ring terminal or Lug. This is what you need to connect to the starter, solenoid, alternator or deep cycle battery. A heavy duty end is shown. Standard ends are thinner and lighter. Heavy duty ends are thick, bulkier and more expensive.

4 gauge 1/4 HD lug. Only $1.25

4 gauge 5/16 HD lug. Only $1.25

4 gauge 3/8 HD lug. Only $1.25

4 gauge 1/2 HD lug. Only $1.25

1-2 (1 or 2) gauge 1/4 standard lug. Only $1.25

1-2 (1 or 2) gauge 5/16 standard lug. Only $1.25

1-2 (1 or 2) gauge 3/8 standard lug. Only $1.25

1-2 (1 or 2) gauge 1/2 standard lug. Only $1.25

1-2 (1 or 2) gauge 1/4 HD lug. Only $2.25

1-2 (1 or 2) gauge 5/16 HD lug. Only $2.25

1-2 (1 or 2) gauge 3/8 HD lug. Only $2.25

1-2 (1 or 2) gauge 1/2 HD lug. Only $2.25

1/0 gauge 1/4 standard lug. Only $1.25

1/0 gauge 5/16 standard lug. Only $1.25

1/0 gauge 3/8 standard lug. Only $1.25

1/0 gauge 1/2 standard lug. Only $1.25

1/0 gauge 1/4 HD lug. Only $2.25

1/0 gauge 5/16 HD lug. Only $2.25

1/0 gauge 3/8 HD lug. Only $2.25

1/0 gauge 1/2 HD lug. Only $2.25

2/0 gauge 1/4 standard lug. Only $1.25

2/0 gauge 5/16 standard lug. Only $1.25

2/0 gauge 3/8 standard lug. Only $1.25

2/0 gauge 1/2 standard lug. Only $1.25

2/0 gauge 1/4 HD lug. Only $2.25

2/0 gauge 5/16 HD lug. Only $2.25

2/0 gauge 3/8 HD lug. Only $2.25

2/0 gauge 1/2 HD lug. Only $2.25

3/0 gauge 5/16 standard lug. Only $2.25

3/0 gauge 3/8 standard lug. Only $1.25

3/0 gauge 1/2 standard lug. Only $1.25

45 degree HD lugs coming soon

90 degree HD lugs coming soon

Special purpose terminals:

1/0 gauge HD splice. Only $2.00

Covers:
Top Post, Side Post, Flag, Elbow, Starter Lug, and Alternator covers.

Crimpers:
Bench Mount, Long or Short Handle and Hammer Crimpers

Heat Shrink, Wire Ties and Loom:
Adhesive lined thick wall heat shrink, Premium UV stabilized wire ties and convoluted loom.

View cart or check out:

For more accessories go to accessories page.